Triplett TDR Bedienungsanleitung Seite 8

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 21
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 7
Page 7
5. Attaching a cable to the TDR
1. Ensure that no power supply or equipment is attached to the cable to
be tested
2. Check that the far end of the cable is either open or shorted (not tted
with a termination)
3. Attach the TDR to one end of the cable to be tested
The cable attachment to the TDR is via a BNC Jack located at the top of the
unit. For un-terminated cables use the alligator clip adaptor.
Coaxial Cable Connect the red clip to the center wire and the black
clip to the shield.
Shielded Cable Connect the red clip to a wire adjacent to the shield of
the cable and the black clip to the shield.
Unshielded Separate out one pair and connect the two clips
Twisted Pair to the two wires of a pair.
Unshielded Connect the clips to any two wires.
Multi-Conductor
Cable
Seitenansicht 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare